+
  • 03(6).jpg

DY-MS704 MS GLUE ( ESPECIALLY IN DOORFRAMES & WINDOWFRAMES)

Specifications

Initial cure time: 20~ 30mins

Package:

330ml/tube; 24tubes/big box

56.8g/tube; 12tubes/small box; 144tubes/big box

20kg/barrel; 40kg/pair

Size:

33x21.5x26(cm)

43x35.2x35.6(cm)

Shelf life: 12 months

1. Properties
DY-MS704 MS GLUE ( especially in doorframes & windowframes), a silane-modified one-component eco-friendly sealant, is made up of MS polymer with excellent temperature resistance. 
  • It is weatherable, elastic though exposed long to outdoors, stong bonding, fast curing, thixotropic, extrudable, low odor, very low VOC. It creates no bubbles or cracks, or corrosion to any building materials. 
  • It can adapt to a variety of working conditions, such as outdoor, indoor, humid, and low temperature conditions.
  • Excellent performance can be maintained at -40℃ ~ 120℃ after full cure. 
  • The surface does not wrinkle or shrink. It does not become hard or crisp at low temperature.
 
2. Applications
  • Sealing window frames and door frames.
  • Installing and sealing aluminum alloy or plastic steel door frames and window frames.
  • Sealing external wall concrete, stone, aluminum sheets.  
  • Sealing baseboards and plates in indoor decoration
 
3. Directions
  • Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth. Use organic solvents such as alcohol to clean up the surface if necessary.
  • To prevent excess glue from spilling and contaminating the substrate, put the paper on both sides. 
  • Remove the cap and pierce the membrance.Cut the nozzle to the desired size and attach to the surface of the object. 
  • Smoothen adhesive immediately after use as it dries in approximately 15 mins. 
  • Use the trimmer to scrape the surface and tear out the paper.  
  • It will fully cure in 24 hours.
 
4. Storage & Warnings
Storage:
  • Store the adhesive in shady, dry, well-ventilated, damp-proofing places。
  • Store the adhesive at room temperature.
  • Keep away from any source of ignition. 
Warnings:
  • The adhesive is irritable to skin and eyes.
  • Keep out of reach of children.
  • In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.

 

4. Parameters

Color

Sagging Resistance Degree

Density(g/cm3)

Cure time(25℃/100g)

Clear/White/Black/Grey

<1.0mm

1.5±0.05

Touch dry:<30mins

Full Cure:24hrs

Tensile Strength(Mpa)

Hardness(shore A)

Heat resistance(℃)

Shelf Life(25℃)

>1.2

40

-40 to +120

12 months