Welcome to Hunan Baxiongdi New Material Co., Ltd.
Telephone :+86-731-86677379 E-mail : info@deyiabglue.com








The use and characteristics of adhesive for automotive interior decoration
- Categories:Industry dynamics
- Author:
- Origin:
- Time of issue:2022-06-24 16:15
- Views:0
(Summary description)Adhesive for automotive interior decoration is an adhesive used for automotive production, such as automotive interior leather and plastic bonding.
The use and characteristics of adhesive for automotive interior decoration
(Summary description)Adhesive for automotive interior decoration is an adhesive used for automotive production, such as automotive interior leather and plastic bonding.
- Categories:Industry dynamics
- Author:
- Origin:
- Time of issue:2022-06-24 16:15
- Views:0
Adhesive for automotive interior decoration is an adhesive used for automotive production, such as automotive interior leather and plastic bonding.
Automotive interiors including ceilings, seats, floors, etc. need to use adhesive for automotive interior decoration.
Features of adhesive for automotive interior decoration:
(1) Environmental protection: non-toxic, no irritating odor, only weak aroma.
(2) Good fire performance: flame retardant, anti-static.
(3) Quick-drying and sticking together.
(4) Solid content: about 50%, saving material 1KG big-mouth frog water-based spray glue is equal to 2-2.5KG oil-based spray glue.
(5) Fog without melting: It can be sprayed on the surface of the product evenly and uniformly, and it will not cause smoke all over the sky.
The correct operation steps of adhesive for automotive interior decoration:
Step 1: Turn on the ventilation system at the construction site, open the doors and windows, and ensure that the site is well ventilated.
Step 2: Before construction, check whether the spray gun function is normal, and eliminate the water accumulation in the air pressure pipeline.
Step 2: The surface of the material is clean and free from grease, dust or other impurities.
Step 4: The nozzle is evenly sprayed on the surface of the material;
Straight type: the nozzle should be at a 45-degree angle to the surface of the material; the nozzle should be about 0.2 meters away from the surface of the material; the air pressure of the spray gun should be adjusted to 2 kg, the normal requirement;
Fan shape: The nozzle should be perpendicular to the surface of the material, spraying a uniform fan-shaped glue mist, and the fan-shaped angle is about 45 degrees;
Step 5: After spraying evenly, leave it for 1-5 minutes before bonding (or if the adhesive layer is not sticky).
Step 6: Adhesive for automotive interior decoration Appropriate pressure during bonding will make the bonding effect better.
Scan the QR code to read on your phone

Call us: 0086 731 86677379
- hotline 0086 731 86677379
- TOP