Structural carbon fiber adhesive can be used for bonding metals, ceramics, plastics, rubber, wood and other same materials or between different materials. It can partially replace traditional connection forms such as welding, riveting and bolting.

Structural carbon fiber adhesive has high strength, peeling resistance, impact resistance, and simple construction process. The stress distribution of the joint surface is uniform, and there is no thermal influence and deformation on the parts. Structural adhesives are widely used in engineering, mainly used for reinforcement, anchoring, bonding, repairing, etc. bonding, etc.

How to use structural carbon fiber adhesive

1. Before using structural carbon fiber adhesive, the surface needs to be wiped clean first. If the pollution is serious, it needs to be cleaned with a cleaning agent. After the surface is clean and dry, install the structural adhesive on the glue gun, and squeeze out the front part first, because this part has certain impurities and is not particularly uniform.

2. Then squeeze it evenly on the surface, apply it on the surface, try not to mix air bubbles. The depth of the structural carbon fiber injection into the void is preferably more than two-thirds, and then it is waiting for the solidification time. Generally speaking, it starts curing after one day, which is directly related to the temperature and climate. Its curing time is still relatively long, and it can be put into use basically after two days. If the temperature is relatively low, the curing can also be accelerated by heating or prolonging the time.