What are the characteristics of the quick sol powder for construction? And if it is used in construction, how is it used? If you want to know, just follow the editor of DY-STRONG INSTANT GLUE for a simple understanding!

1. Features

It has unique features such as compression and wear resistance, high hardness, no joints, no heat absorption, UV light resistance, impermeability, crack resistance, hollow drum resistance, fire resistance, no heat conduction, and water resistance. It is a collection of various properties Integrated environment-friendly, energy-saving, non-toxic, harmless, non-polluting and environmentally friendly products. The rubber powder can be dissolved into a transparent high-concentration glue in a few minutes in tap water at room temperature. It can be used to prepare construction glue, internal wall putty, internal wall water-resistant putty, external wall putty, gypsum putty, etc. It is easy to start construction and can survive for many years.

2. How to use

1. For bonding ceramic tiles: mix 100 grams (1 bag) of building quick sol powder into 15-16 kilograms of water and dissolve it (not quickly), and then mix 33-35 kilograms of sensitive soil into a slurry.

2. Interface agent: mix each bag (100g) of building quick sol powder in 12 kg of water while mixing, and then mix it in 12 kg of water for an average (about 1 minute). Surface and interface application (can be sprayed and brushed).

3. Painting the walls: Add each bag of building quick-soling powder into 24 kg of water to make glue, and then mix the fragrant powder glue into the mortar to evenly paint the wall.

4. For mud powder: mix 100 grams of building quick sol powder (1 bag) in 8-9 kg of water and mix averagely, and then participate in Shuangfei powder (big white powder). The amount of participation of Shuangfei powder can be based on the actual situation. Batch and scrape the wall. Possess unique places such as not falling fans and easy to start.

5. Polypropylene fiber and tape fiber bonding: Add each bag of rubber powder to 15 kg of water that is being mixed without quickly until all is dissolved to make glue, and then it can be added to the sensitive soil to make slurry (the amount of sensitive soil can be based on Participate in the actual situation), can bond around 33-45 square meters of coil. This product does not have any side effects on the clay.

6. Bonded wallboard (marble, thermal board, etc.): Mix each bag of rubber powder in 15-16 kg of water and mix it evenly, and then add a suitable amount of sensitive soil to make cement. This cement has high strength and does not appear to adhere to the wallboard. crack.

In summary, this DY-STRONG INSTANT GLUE editor tells: a brief introduction to the use of building fast sol powder, hope you can learn more through the introduction of the above editor. If you want to learn more about it, I suggest you pay attention to this website, and there will be related articles to be updated in the future.