The quality CAST IRON REPAIR ADHESIVE is a high-performance polymer metal material compounded by a variety of alloy materials and modified toughened heat-resistant resins. It is suitable for the repair of gray iron, ductile iron and other casting defects and the repair of parts wear, corrosion, and cracks. After repair, the color is basically the same as that of the substrate, with high strength, excellent wear resistance, corrosion resistance and aging resistance, and can be processed together with the substrate.

The quality CAST IRON REPAIR ADHESIVE is a two-component, mortar-like, room temperature curing polymer resin adhesive. It is suitable for the repair of casting pores, blisters, cracks or processing errors after machining. The cured material has high hardness and no shrinkage, and it can be processed by various machines. It has good comprehensive performance and high bonding strength with metal; it has excellent properties such as wear resistance, aging resistance, water resistance, and various chemical corrosion resistance, and it can withstand high temperatures of 168°C.

The quality CAST IRON REPAIR ADHESIVE has high bonding strength with metal; good construction technology, curing without shrinkage; cured material has high strength and can be processed by various types of mechanical processing; it has abrasion resistance, corrosion resistance and aging resistance characteristic.

The quality CAST IRON REPAIR ADHESIVE usage:
1. Surface treatment: roughen the surface to be repaired and clean it with a cleaning agent.
2. Preparation: According to mass ratio A:B=7:1 or volume ratio A:B=4:1, mix the two components of A and B evenly, and use them up within the specified operating time limit.
3. Coating: Apply the mixed material layer by layer to the area to be repaired. The first layer should be compacted to make it fully wetted with the substrate. If machining needs to be done later, a proper amount of machining allowance should be left.
4. Curing: It can be mechanically processed after 8 hours of curing at 20～25℃, and it can be put into use after 24 hours. If the temperature is low, heating or prolonging the curing time should be used to promote curing.