The main function of THREADLOCKER ADHESIVE is to prevent the screw connection from loosening. If the screw is coated with THREADLOCKER ADHESIVE and then assembled, a strong plastic film will be formed in the thread gap after curing, so that the screw will not be loosened. The seal is leak-proof, and it is impossible for any plane to be in close contact with each other, and leak-proof sealing is required. Hold positioning. Use THREADLOCKER ADHESIVE to fill the fit gap, solid and durable, stable and reliable after curing.

With the THREADLOCKER ADHESIVE method, the machining accuracy requirements are reduced, the assembly operation is simple, the production efficiency is improved, and the energy consumption and processing costs are saved. Fill plugging. The principle of THREADLOCKER ADHESIVE is a one-component sealing adhesive made by the principle of inhibiting the polymerization of free radicals by oxygen, which can be used for both bonding and sealing. When the glued surface is isolated from the air and catalyzed, it can quickly polymerize and cure at room temperature.

THREADLOCKER ADHESIVE is composed of a variety of components, especially the monomers are ever-changing, and each component change may obtain new properties. Therefore, there are many varieties of THREADLOCKER ADHESIVE, and their classification methods are not uniform. Under normal circumstances, it can be classified according to the structure of the monomer, the type and strength of the monomer, and the viscosity, and there are also classifications according to the purpose.

The more common classification method is the classification method according to the purpose and the structure of the monomer. According to the purpose, it can be divided into: fastener locking and sealing, flange surface and pipe joint sealing, bonding and holding, and infiltration plugging. According to monomer structure: ether type, alkyd ester, epoxy ester, polyurethane.

Precautions for the use of THREADLOCKER ADHESIVE; when using THREADLOCKER ADHESIVE, use a gas-permeable container. It cannot be filled with metal, glass and other non-breathable containers. It cannot be filled too much. The THREADLOCKER ADHESIVE should not be exposed to the sun. It should be stored in a cool and dry place. It is suitable for metal. It is not suitable to use porous materials such as plastic, wood, paper, etc., and surface treatment is required before use, rust removal-oil removal-cleaning-drying.

The assembly should be positioned as soon as possible, and the workpiece can not be moved after positioning. In order to achieve THREADLOCKER ADHESIVE curing conditions, it must meet the isolation of oxygen, the gap is generally required to be <0.2mm, and the active initiation center. If the bonding force is too large during removal, the parts can be heated at high temperature Disassemble while it is hot.