+
  • image/LyP5ELtuTK6xYasA5eRmOQ.jpg
  • image/S35MWSUwQC-IynnaSHrZRw.jpg
  • image/1MRYxN-zSsmTmG5xaJta8w.jpg
  • image/IlLQkj6hQBS5NPUadXZUzQ.jpg
  • image/gpsMZd92QGW57nwteIp4Kw.jpg

DY-E503 30-MINUTE CLEAR EPOXY RESIN AB ADHESIVE

Specifications

Initial Cure Time: 30 Minutes

Package:

50ml/pair; 10pairs/small box; 60pairs/big box

400ml/pair; 6pairs/small box; 24pairs/big box

2kg/pair; 6pairs/big box

5kg/pair; 3pairs/big box

15kg/barrel; 30kg/Pairs

Shelf Life: 12 months

1. Properties
DY-E503 30-MINUTE CLEAR EPOXY RESIN AB ADHESIVE is a two-component adhesive with the characteristics of low odour, eco-friendly, non-toxic and good insulation, resistance of oil, water, acid and alkali, and super high strength.
 
2. Applications
DY-E503 30-MINUTE CLEAR EPOXY RESIN AB ADHESIVE is applicable to LED lightings, mechanical equipment, instruments and meters, electronic appliances, and medical equipment. It is used to self -bond or inter-bond ceramics, glass, metal, and plastic.
 
3. Directions
  • Surfaces of the substrates must be cleaned, and dried.
  • Mix components A and B at the ratio of 1∶1 in weight.  Initial cure can be reached within 30 minutes (25℃), and the bonded materials can be used after 24 hours.
  • After the materials are bonded, mechanical treatment is needed to meet the the bonding requirements so as not to affect its effect.
  • The adhesive is a bit viscous, which is normal and does not affect the bonding effect.
 
4. Storage & Warnings
 Storage:
  • Store the adhesive in shady, dry, well-ventilated, damp-proofing places。
  • Store the adhesive at room temperature.
  • Keep away from any source of ignition.  
 Warnings:
  • The adhesive is irritable to skin and eyes. 
  • Keep out of reach of children.
  • In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.
 
5. Parameters

Color

Viscosity(CPS)(25℃)

Mixing Ratio

Work Time(25℃/100g)

A:Clear

A:10000-15000

1:1

15 Minutes

B:Clear

B:10000-15000

Cure Time(25℃/100g)

Tensile Shear Strength(St-St)

Heat Resistance(℃)

Shelf Life(25℃)

Touch dry:30 minutes

≥15 Mpa

-60 to +100

12 months

Full Cure:24 hours