DY-E503 30 MINUTE EPOXY-SET (CLEAR, INJECTABLE)
Specifications
Initial Cure Time: 30 Minutes
Packages:
6ml/tube; 12tubes/small box; 288tubes/ big box
24ml/tube; 12tubes/ small box; 144tubes/big box
Size:
53.5x47.5x45.3 (cm)
47x33x54.5 (cm)
Shelf Life: 12 months
- Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth.
- Mix part A and part B at the ratio of 1:1
- Apply the mixture onto the substrate to be bonded. Press and rotate the substrates while bonding.
- Initial cure is in 30 minutes. It’ll take 12 hours to reach its maximum strength. It can be operated at -60℃~150℃.
- More treatment is needed when necessary after its curing to reach its greatest effect.
- The adhesive is viscous, which is normal.
- Store the adhesive in shady, dry, well-ventilated, damp-proofing places。
- Store the adhesive at room temperature.
- Keep away from any source of ignition.
- The adhesive is irritable to skin and eyes.
- Keep out of reach of children.
- In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.
5. Parameters
Color |
Viscosity(CPS/25℃) |
Mixing Ratio |
Work Time(25℃/100g) |
A:Clear |
A:10000-15000 |
1:1 |
15 Mins |
B:Clear |
B:10000-15000 |
||
Cure Time(25℃/100g) |
Lap Shear Strength(St-St) |
Heat Resistance(℃) |
Shelf Life(25℃) |
Touch Dry:30 mins |
≥15 Mpa |
-60 to +150 |
12 months |
Full Cure:24 hrs |
previous page
next page
ONLINE MESSAGE
PRODUCTS RECOMMENDED
They develop into seven series such as Epoxy AB Glue, Modified-Acrylic AB Glue, Threadlocker, Gasket Maker, MS Sealant, No More Nails Glue,
502 Super Glue with more than three hundred varieties of products.