DY-E705 5 MINUTE EPOXY GLUE

Specifications

Initial Cure Time: 5 Minutes

Package:

56.8g/pair; 24pairs/ small box; 288pairs/big box

20g/pair; 24pairs/ small box; 288pairs/big box

10g/pair; 6pairs/card; 144pairs/ big box

Size:

55x31x47 (cm)

47x46x35 (cm)

22x14x50 (cm)

Shelf Life: 12 months

Alibaba

Back to list

Certificates and Honors

Leave A Message

1. Properties

DY-E705 is two-component steel epoxy adhesive, which is developed by advanced and environmentally-friendly technique and imported raw materials. It is characterized with low odor, fast curing at room temperature, strong bonding, and easy use. It is resistant to water, oil, acid, and alkali.

2. Applications

DY-E705 is applicable to bonding and repairing machinery, electronics, automobiles, shipbuilding, chemical industry, and handicrafts. It forms excellent self and inter-bonding to substances such as metals, rubbers, leathers, various kinds of plastics.

3. Directions

Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth.
Remove the cap from the tube and puncture the tubes.
Mix part A and part B at the ratio of 1:1. Mix thoroughly until a uniform color is achieved. It must be used within 5 minutes.
Apply a thin coat to both surfaces. Mixture will become warm while it sets. No clamping. Slight pressure is needed while material sets. If temperature is below 5℃, it will take a longer time to cure.

4. Storage & Warnings

Storage:

Store the adhesive in shady, dry, well-ventilated, damp-proofing places。
Store the adhesive at room temperature.
Keep away from any source of ignition.

Warnings:

The adhesive is irritable to skin and eyes.
Keep out of reach of children.
In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.

5. Parameters

Color	Cured Color	Viscosity(CPS/25℃)	Mixing Ratio	Work Time(25℃/100g)
A:black	Light Black	A:＞100000	1:1	5 Minutes
B:milky white		B:＞100000
Cure Time(25℃/100g)	Lap Shear Strength(St-St)	Heat Resistance(℃)	Shelf Life(25℃)
Touch Dry:5-10 Mins	≥16 MPa	-60 to +100	12 months
Full cure:12 hrs