DY-G40 STRUCTURAL STEEL ADHESIVE
Specifications
Initial Cure Time : 2-4 hrs
Package :
4kg/barrel; 8kg/pair
20kg/barrel; 40kg/pair
Shelf Life : 24 months
1. Properties
- High adhesion strength, especially for steel-steel and steel-concrete bonding, high lap shear strength
- Excellent stiffness, peel strength and impact resistance. It can be used to strengthen bridge under dynamic load.
- Anti-aging, durability, weatherability and corrosion resistance to acid, alkali and water
- It has clearly thixotropic property, non-toxic and environmental-friendly, low curing shrinkage rate
- Easy operation. No flowing during vertical and overhead operation.
2. Applications
This steel structural adhesive is a two-component epoxy modified structural adhesive. It is suitable for strengthening reinforced concrete by bonding steel plate to concrete (if steel plate is in big size or its thickness >= 5mm, it is suggested to use adhesive filling method to strengthen the concrete.). In civil engineering, it can be used to bond metal, non-metal and polymer materials. In addition, it can be used to bond and fix steel bars, screws, equipment foundations and support pads of bridge beams. In household, it can be used in decoration, chandelier, housing plug and water-proof.
3. Directions
- Mix part A and part B at the ratio of 1:1 evenly.
- Polish the concrete surface until new concrete fracture appears. Polish steel till it is rough enough. Clean oil contaminants with acetone.
- Adjust the mixing ratio according to the conditions of construction site, and temperature. Pre-test is necessary to determine its proper mixing ratio.
4. Storage & Warnings
Storage:
- Store the adhesive in shady, dry, well-ventilated, damp-proofing places。
- Store the adhesive at room temperature.
- Keep away from any source of ignition.
Warnings:
- The adhesive is irritable to skin and eyes.
- Keep out of reach of children.
- In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.
5. Parameters
Color |
Viscosity(CPS/25℃) |
Mixing Ratio |
Wrok Time(25℃/100g) |
Cure Time(25℃/100g) |
A: Grey |
A:20000-40000 |
1:1 |
40-60mins |
Touch Dry:2hrs |
B: Light Brown |
A:20000-40000 |
Full Cure:48hrs |
||
Shear Strength(St-St) |
Compressive Stength |
Tensile Strength |
Heat Resistance(℃) |
Shelf Life(25℃) |
≥16 Mpa |
≥70 |
≥30 |
-60 to +100 |
24 months |
Previous
Previous