DY-J853 LOUDSPEAKER ADHESIVE
Specifications
Initial Cure Time: 3-5 Minutes
Packages:
2kg/pair; 6pairs/big box
5kg/pair; 3pairs/big box
Shelf Life: 12 months
- Clean the contaminants like water, dusts, oil etc. on the surface of the substrate and keep it clean, dry and smooth. And clean the adhesive gun and mixer.
- Mixed adhesive should not stay in the mixer more than one minute to avoid hardening which may affect its use.
- Take out the screw panel after the use and put it with adhesive gun together in acetone.
- At low temperature, initial cure time will be long so that the adhesive tend to flow down. If the environmental temperature is lower than 15°C, its viscosity will be high and cure time will become long. In this case, the adhesive should stay in warm water or in oven at 35°C– 45°C for 30 minutes to keep the adhesive temperature between 25°C-35°C. If temperature is between 25°C-35°C, its full cure time is 24 hours. If temperature is lower than 15°C, its full cure time is 48 hours.
- Store the adhesive in shady, dry, well-ventilated, damp-proofing places。
- Store the adhesive at room temperature.
- Keep away from any source of ignition.
- The adhesive is irritable to skin and eyes.
- Keep out of reach of children.
- In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.
Component |
A Component |
B Component |
Appearance |
Half transparent, viscous liquid |
Dark red, viscous liquid |
Main Component |
Modified acrylic |
Modified acrylic |
Viscosity(cps/25℃) |
3000-9000 |
3000-9000 |
density(g/cm3 20°C) |
1.00±0.02 |
1.00±0.02 |
Solid content |
100﹪ |
|
Cure time(25℃) |
Initial cure: 3-5 minutes; full cure: 24 hours |
|
Shelf life(25℃) |
6 months |
previous page
ONLINE MESSAGE
PRODUCTS RECOMMENDED
They develop into seven series such as Epoxy AB Glue, Modified-Acrylic AB Glue, Threadlocker, Gasket Maker, MS Sealant, No More Nails Glue,
502 Super Glue with more than three hundred varieties of products.