+
  • image/8327w6ZURhaDpMCDZOKcCg.jpg
  • image/7VFy73ErS9WhxIMh6ZyOcA.jpg
  • image/y1Aj_0VQRECPhOi101tHPg.jpg

DY-J8833 SPECIAL ADGESIVE FOR ELEVATOR CAGES

Specifications

Initial Cure Time: 5-10 Minutes

Packages:

400ml/pair; 6pairs/small box; 24pairs/big box

2kg/pair; 6pairs/big box

5kg/pair; 3pairs/big box

Shelf Life: 6 months

1. Properties
DY-J8833 ADGESIVE for ELEVATOR CAGES, a modified acrylate AB glue, is characterized with high strength, high performance and impact resistance. It has the following advantages: High lap shear and peel strength; Excellent thixotropic property; Not easy to flow; Easy to use.
 
2. Applications
DY-J8833 ADGESIVE for ELEVATOR CAGES is not only suitable for elevator cages and other stainless steel with reinforcing ribs, but also for bonding metal, plastics and rubber.
 
3. Directions
  • Clean the contaminants like water, dusts, oil etc. on the surface of the substrate and keep it clean, dry and smooth.
  • Mix components A and B at the ratio of 1:1 in weight and apply the mixture onto the substrate to be bonded.
  • Press and rotate the substrates while bonding.
  • Initial curing in 5-10 minutes. It takes one hour and 24 hours to reach its use strength and maximum strength respectively.
  • DO NOT mix a great amount of adhesive at one time.
 
4. Storage & Warnings
 Storage:
  • Store the adhesive in shady, dry, well-ventilated, damp-proofing places。
  • Store the adhesive at room temperature.
  • Keep away from any source of ignition.  
 Warnings:
  • The adhesive is irritable to skin and eyes.
  • Keep out of reach of children.
  • In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.

 

5. Parameters

Component

A Component

B Component

Appearance

green, viscous liquid

red, viscous liquid

Viscosity(cps/25℃)

8000-12000

8000-12000

density(g/cm3)

1.00±0.02

1.00±0.02

Solid content

100﹪

Cure time(25℃)

Initial cure: 5-10 minutes; full cure: 24 hours

Lap shear strength (Mpa)

≥20

Shelf life(25℃)

6 months