DY-J8833 SPECIAL ADGESIVE FOR ELEVATOR CAGES
Specifications
Initial Cure Time: 5-10 Minutes
Packages:
400ml/pair; 6pairs/small box; 24pairs/big box
2kg/pair; 6pairs/big box
5kg/pair; 3pairs/big box
Shelf Life: 6 months
- Clean the contaminants like water, dusts, oil etc. on the surface of the substrate and keep it clean, dry and smooth.
- Mix components A and B at the ratio of 1:1 in weight and apply the mixture onto the substrate to be bonded.
- Press and rotate the substrates while bonding.
- Initial curing in 5-10 minutes. It takes one hour and 24 hours to reach its use strength and maximum strength respectively.
- DO NOT mix a great amount of adhesive at one time.
- Store the adhesive in shady, dry, well-ventilated, damp-proofing places。
- Store the adhesive at room temperature.
- Keep away from any source of ignition.
- The adhesive is irritable to skin and eyes.
- Keep out of reach of children.
- In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.
5. Parameters
Component |
A Component |
B Component |
Appearance |
green, viscous liquid |
red, viscous liquid |
Viscosity(cps/25℃) |
8000-12000 |
8000-12000 |
density(g/cm3) |
1.00±0.02 |
1.00±0.02 |
Solid content |
100﹪ |
|
Cure time(25℃) |
Initial cure: 5-10 minutes; full cure: 24 hours |
|
Lap shear strength (Mpa) |
≥20 |
|
Shelf life(25℃) |
6 months |
previous page
next page
ONLINE MESSAGE
PRODUCTS RECOMMENDED
They develop into seven series such as Epoxy AB Glue, Modified-Acrylic AB Glue, Threadlocker, Gasket Maker, MS Sealant, No More Nails Glue,
502 Super Glue with more than three hundred varieties of products.