DY-J8840 TRANSPARENT STRUCTURAL ADHESIVE
Specifications
Initial Cure Time: 5-10 Minutes
Packages:
50ml/pair; 10pairs/small box; 60pairs/big box
400ml/pair; 6pairs/small box; 24pairs/big box
2kg/pair; 6pairs/big box
5kg/pair; 3pairs/big box
Shelf Life: 12 months
- Clean the contaminants like water, dusts, oil etc. on the surface of the substrate and keep it clean, dry and smooth.
- Mix the A and B components at the ratio of 1:1 in weight and apply the mixture on the substrate to be bonded.
- Press and rotate the substrates while bonding. The initial cure will be reached in 5-10 minutes. It'll take 1 hour and 24 hours to reach its use strength and maximum strength respectively. It can be applied at the temperature of -30°C ~120°C.
- Store the adhesive in shady, dry, well-ventilated, damp-proofing places。
- Store the adhesive at room temperature.
- Keep away from any source of ignition.
- The adhesive is irritable to skin and eyes.
- Keep out of reach of children.
- In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.
5. Parameters
Component |
A component |
B component |
Appearance |
Light blue, transparent, viscous liquid |
Colorless, transparent, viscous liquid |
Viscosity(cps/25℃) |
3000-6000 |
3000-6000 |
density(g/cm3) |
1.00±0.02 |
1.00±0.02 |
Solid Ingredients |
100﹪ |
|
Cure time(25℃) |
Initial cure: 5-10 minutes; full cure: 24 hours |
|
Tensile shear strength (Mpa) |
≥25 |
|
Heat resistance(℃)(after curing) |
-30~120 |
|
Shelf life(25℃) |
12 months |
previous page
ONLINE MESSAGE
PRODUCTS RECOMMENDED
They develop into seven series such as Epoxy AB Glue, Modified-Acrylic AB Glue, Threadlocker, Gasket Maker, MS Sealant, No More Nails Glue,
502 Super Glue with more than three hundred varieties of products.