+
  • 01(5).jpg

DY-MS701 ANTI-MOLD MS GLUE

Specifications

Initial cure time: 20-30mins

Package:

330ml/tube; 24tubes/big box

56.8g/tube; 12tubes/small box; 144tubes/big box

20kg/barrel; 40kg/pair

Size:

33x21.5x26(cm)

43x35.2x35.6(cm}

Shelf life: 12 months

1. Properties

DY-MS701 Anti-Mold MS GLUE, a silane-modified one-component sealant, is made up of MS polymer with excellent temperature resistance. It is suitable for such wet places as kitchens, bathrooms, and washrooms. It will develop into elastomers due to reactions by contacting with air or moisture in the substrate. It cures with moisture.     

  • It is resistant to mold, water and humidity. 
  • It is low odor, formaldehyde-free, and eco-friendly. 
  • It can bond well ceramic, ceramic tiles, acrylic, marble and most other metal and non-metal substrates. 
  • It can make the sealed parts beautiful and clean. 
 
2. Applications
  • Bonding the gaps between kitchen sinks, troughs or gas appliance and their base boards. Installing, waterproofing, plugging and decorating grocery boards, water faucet, and table basins.
  • Bonding the gaps between the cabinet, window frame, furniture and their substrates. 
  • Sealing and waterproofing the gaps between bathroom walls or bathtubs and ground; those between table basins and baseboards, and corners. 
  • Repairing and sealing drain pipes, ceramic tile joints and showers.
  • Repairing and sealing a wide ranges of stones and pipes. Also applicable to other places which need resistance to mold.
 
3. Directions
  • Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth. Use organic solvents such as alcohol to clean up the surface if necessary.
  • To prevent excess glue from spilling and contaminating the substrate, put the paper on both sides. 
  • Remove the cap and pierce the membrance.Cut the nozzle to the desired size and attach to the surface of the object. 
  • Smoothen adhesive immediately after use as it dries in approximately 15 mins. 
  • Use the trimmer to scrape the surface and tear out the paper.  
  • It will fully cure in 24 hours.
 
4. Storage & Warnings
Storage:
  • Store the adhesive in shady, dry, well-ventilated, damp-proofing places。
  • Store the adhesive at room temperature.
  • Keep away from any source of ignition. 
Warnings:
  • The adhesive is irritable to skin and eyes.
  • Keep out of reach of children.
  • In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.

 

5. Parameters

Color

Sagging Resistance Degree

Density(g/cm3)

Cure time(25℃/100g)

Clear/White/Black/Grey

<1.0mm

1.5±0.05

Touch dry:<30mins

Full Cure:24hrs

Tensile Strength(Mpa)

Hardness(shore A)

Heat resistance(℃)

Shelf Life(25℃)

>1.2

40

-40 to +120

12 months