DY-N340 THREADLOCKER ADHESIVE
Specifications
Initial Cure Time: 5-10 Minutes
Package:
10g/tube; 20tubes/ small box; 200tubes/big box
50g/tube; 12tubes/small box; 120tusbes/ big box
250g/tube; 6tubes/small box; 60tusbes/ big box
Size:
54x31.5x32(cm)
62x36.4x18.5(cm)
58x50x19.5(cm)
Shelf Life: 24 months
DY-N340 is applicable to locking and sealing threads under M36, and to locking parts of cylinders, and hole plugs.
- Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth.
- Coat the axle with the adhesive. Then install the rotator, gear wheel and pulley wheel onto the axle. For threads, coat the screw with the adhesive. Match it with the nut and rotate it several times to make the adhesive even. And then fix them.
- Let them be until the adhesive cures fully.
- Store the adhesive in shady, dry, well-ventilated, damp-proofing places。
- Store the adhesive at room temperature.
- Keep away from any source of ignition.
- In the event of mass use, make a pre-test.
- The adhesive is irritable to skin and eyes. Wear gloves while applying glue.
- Keep out of reach of children.
- In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.
Item |
Color |
Viscosity(CPS/25℃) |
Filling Gap(mm) |
Cure Time(25℃/100g) |
DY-N340 |
Light Yellow |
800-1600 |
0.13 |
Touch Dry: 5-10mins |
Full cure: 24hrs |
Failure Moment(N.m) |
Remove the torque (N.m) |
Heat Resistance(℃) |
Shelf Life(25℃) |
28 |
20 |
-60 to +165 |
24 months |
previous page
next page
ONLINE MESSAGE
PRODUCTS RECOMMENDED
They develop into seven series such as Epoxy AB Glue, Modified-Acrylic AB Glue, Threadlocker, Gasket Maker, MS Sealant, No More Nails Glue,
502 Super Glue with more than three hundred varieties of products.