DY-N550 THREAD SEALANT FOR METAL PIPE

Specifications

Initial Cure Time: 10-20 Minutes

Package:

50g/tube; 12tubes/small box; 120tusbes/ big box

250g/tube; 6tubes/small box; 60tusbes/ big box

Size:

62x36.4x18.5 (cm)

58x50x19.5 (cm)

Shelf Life: 24 months

Alibaba

Back to list

1. Applications

DY-N550 can replace traditional sealing materials which is ineffective and leads to leakage. It is applied to locking and sealing in gas pipes, extinguishing pipes, air conditioners, gas cylinders, water pipes, hydraulic pipes, and mechanical equipment.

2. Directions

Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth.
It will take 2-4 hours to assemble at temperatures above 25℃, 4-8 hours at temperatures of 25℃~15℃. Press them in 8-16 hours. Double time is needed for stainless steel, aluminum and alloy steel.
Over-tighten is unnecessary. Fit tightly within DN32 by hand and then it can be completely sealed.
Coat the interface between the screw bolt and the nut with enough adhesive. Rotate it several times to make the adhesive even. And then fix them.
Let them be until the adhesive cures fully.

3. Storage and warnings

Storage:

Store the adhesive in shady, dry, well-ventilated, damp-proofing places。
Store the adhesive at room temperature.
Keep away from any source of ignition.

Warnings:

In the event of mass use, make a pre-test.
The adhesive is irritable to skin and eyes. Wear gloves while applying glue.
Keep out of reach of children.
In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.

4. Parameters

Item	Color	Viscosity(CPS/25℃)	Filling Gap(mm)	Cure Time(25℃/100g)
DY-N550	Light Yellow	6000-10000	0.3	Touch Dry: 10-20mins
				Full cure: 24hrs