30 Minute Epoxy Resin a and b epoxy Clear Injectable Bonding And Repairing Led Lights

1. Properties

DY-E503 Clear Epoxy Adhesive is developed by advanced and environmentally-friendly technique and imported raw materials. It is characterized with being clear, strong bonding, non-toxic, and low odor. It is resistant to water, oil, acid, alkali, low and high temperature.

 

2. Applications

DY-E503 is applicable to bonding and repairing LED lights, machinery, electronics, instrumentation, automotive, shipbuilding, textile, construction, chemical industry, aviation, medical equipment. It forms excellent bonding to various rigid substances such as metal, ceramic, marble, glass, wood and plastics.

 

3. Directions

• Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth.
• Mix part A and part B at the ratio of 1:1
• Apply the mixture onto the substrate to be bonded. Press and rotate the substrates while bonding.
• Initial cure is in 30 minutes. It’ll take 12 hours to reach its maximum strength. It can be operated at -60℃~150℃.
• More treatment is needed when necessary after its curing to reach its greatest effect.
• The adhesive is viscous, which is normal.

• The adhesive is irritable to skin and eyes.
• Keep out of reach of children.
• In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.

 

5. Parameters

Color	Viscosity (cps)	Maxing Ratio	Work Time
A: Clear	A:10000~150	1:1	15 Mins
B: Clear	B:10000~150
Cure Time	Lap Shear Strength	Heat Resistance	Shelf Life
Touch Dry: 30 mins	>=15Mpa	-60~150℃	12 Months
Full Cure: 24 Hrs