Ultra Strength Epoxy Adhesive (Boxes)

• Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth.
• Remove the cap from the tube and puncture the tubes.

    Mix part A and part B at the ratio of 1:1. Mix thoroughly until a uniform color is achieved. It   must be used within 30 minutes.

• Apply a thin coat to both surfaces. Mixture will become warm while it sets. No clamping. Slight pressure is needed while material sets. If temperature is below 5℃, it will take a longer time to cure.

• Store the adhesive in shady, dry, well-ventilated, damp-proofing places。
• Store the adhesive at room temperature.
• Keep away from any source of ignition.  

• The adhesive is irritable to skin and eyes.
• Keep out of reach of children.
• In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.

5. Parameters

€€

€€