|
Product Details:
|
| Other Names: | Phenolic Epoxy Resin | MF: | (C11H12O3)n |
|---|---|---|---|
| EINECS No.: | 500-033-5 | Classification: | Double Components Adhesives |
| Main Raw Material: | Epoxy | Usage: | Construction, Fiber & Garment, Packing, Transportation, Woodworking, Matels, Rubbers, Leathers, Various Kinds Of Plastics |
| Type: | Two Component | Color:: | Black : Milky White |
| Ratio: | 1:1 | Temperature Tolerance(℃):: | -60℃~100℃ |
| Volume:: | 20g,40g,56.8g | Shear Strength:: | More Than 20 Mpa |
| Viscosity(cps/25degree):: | 100000 | Curing Time :: | 3-6minutes Initial Curing , Total Curing After 24 Hours |
| Guarantee:: | 12months | Shear Strength(MPa):: | ≥16Mpa |
| Function: | Bonding+sealing |
Advantages Of Property
Epoxy resin adhesive DY-E705 is two component steel epoxy adhesive. It is developed by advanced worldwide well-known environmental-friendly technologies with imported main raw materials and has following advantages: low odor, fast curing at room temperature. High adhesion and easy to use. Resistant to acid, oil, salt water. Alkali, solvents and corrosion, good adhesion to almost all substrates.
Technical Parameters
|
Color |
Cured Color |
Viscosity (CPS)(25°C) |
Mixture |
Open Time/100g |
Curing Time (25°C)/100g |
Tensile Shear Strength (St-St) |
Heat Resistance 25°C |
Shelf Life (25°C) |
|
A:black |
Light Black |
A:>100000 |
1:1 |
5 Minutes |
Initial curing 5-10 Minutes |
≥16 MPa |
-60 to +100 |
12 months |
|
B:milky white |
B:>100000 |
Full curing 12 hours |
Application Method
(1). Surface of adherent has to be cleaned, dried.
(2). A/B components should be mixed 1:1 in weight in proper amount. Usually, initial curing can be reached within 5-10Minutes(25°C) and available in 1 hours. full Bonded joint can be used after 24 hours.
(3). After bonding the product, according to the requirements of the bonding process on the treatment, so as not to affect the effect.
(4). This product is partial thick, will be a normal phenomenon and does not affect the bonding effect.
(1). Automobile, motorcycle water tank, fuel tank, oil, carburetor, cylinder head, drain, drive bearing sleeve manufacturing and repair, plastic parts such as baffle, handle.
(2). Decoration industry: metal, wood, plastic and building on the aluminum frame, door frame, staircase protection board bonding, advertising signs and the production of fixed, marble and wood bonding.
(3). Stone processing industry: all kinds of marble, marble bonding, than the silica gel curing time to be faster, easy to operate.
(4). Elevator industry: elevator stainless steel sheet and the adhesion of the ribs.
(5). Furniture manufacturing industry: plastic, metal decorative strip and panel bonding, wood fixed, marble and wood fixed.
(6). Handicrafts, toys, all kinds of jewelry manufacturing industry: ceramic crafts, glass products, shellfish crafts, hair clips and other decorations bonding.
(7). Luggage, footwear industry: luggage box metal or hard plastic plus or decorative strip fixed, boots with hard PVC plastic and PO plastic bonding.
(8). Electronic manufacturing industry: electric motor, magnetic motor magnet on the bonding.
(9). Manufacture of sports equipment: skateboard, fitness equipment installation fixed.
(10). Machinery manufacturing industry: a variety of mechanical parts of the repair, fixed, wear-resistant alloy installation.
(11). Lighting manufacturing industry: all kinds of lighting parts installation.
(12). Chemical pipeline, liquefied gas pipeline plugging repair.
(13). Repair of household items.
(1). 10g+10g/Pair; 24Pairs/Small Box; 288Pairs/Carton
(2). 28.35g+28.35g/Pair; 24Pairs/Small Box; 288Pairs/Carton, Carton Size : 550x450x320 (cm)
(3). 40g+40g/Pair; 12Paris/Small Box; 144Pairs/Carton
| Packaging | Shipping |
|
(1). 10g+10g/pair; 24Pairs/Small Box; 288Pairs/Cartons (2). 24g+24g/pair; 12Pairs/Small Box; 144Pairs/Cartons (3). 28.35g+28.35g/pair; 24Pairs/Small Box; 288Pairs/ Cartons
|
1.FOB Terms(FOB GUANGZHOU/SHANGHAI/CHANGSHA) or EX Works. 2.Free sample. 3. 24 hours after-sale service. 4.Customized design and brand is ok. |
Q1: Are you a factory or a trading company?
Of course, we are a Factory.
Q2: Can you provide the samples?
Yes, we can. The sample is free, and you only need bear the freight.
Q3: How long can I got sample?
The sample time is 5-7 days and express delivery usually needs 5-7 day.
Q4: Production period and delivery time?
3 days to 7 days.
Q5: What's your MOQ (min order quantity) ?
Our MOQ is 3000 pairs.
Q6: How can you control of product quality?
We have experienced and skilled labors and QC team. Goods are 100% inspection before packing.
Contact Person: SU
Tel: 008615200906996
Fax: 86-731-86677379
