Electrical Potting Adhesive with Dielectric Strength >25kv/mm Tensile Strength >40Mpa and Bending Strength >80Mpa for Medium-high Voltage Insulation

This electrical potting adhesive provides superior protection for electronic components with excellent high temperature resistance and electrical insulation properties.

• Eliminates adverse effects of UV light, ozone, moisture, and chemicals on circuits
• Excellent high and low temperature resistance
• Superior electrical insulation performance
• High thermal conductivity with low expansion rate
• Waterproof, oil resistant, dust proof, corrosion resistant
• Excellent aging resistance and cold/hot impact resistance

1. Preheat components A and B at 50-60℃ for 2 hours before mixing
2. Mix at mass ratio A:B = 100:90, stirring thoroughly
3. Vacuum defoaming for 5-10 minutes after mixing
4. Pour mixture into product promptly to maintain fluidity
5. Cure at 85℃ for 3-5 hours followed by 105℃ for 6-8 hours